Small Scale Petrolem Motor Engine Oil Lubricants Oil Press
Petrolem Motor Engine Oil Distillation Machine Is widely used in
car dealer,oil refinery project for distilling waste oil,waste
industrial lubricant oil, waste hydraulic oil, diesel and gasoline
engine oil to clean base oil, it’s applied with vacuum distillation
technology,with features of low cost,high recovery more than 85%,
environmental and energy-saving.the oil distillation machine is not
only renew the waste oil but also reduce the pollutant. It’s the
first option for waste oil recycling enterprises, and it will bring
the greatest economic and social benefits.
Using advanced vacuum distillation technology,which is different
from the traditional sulfuric acid and the flocculation process.
Traditional process uses sulfuric, water glass(Na2O.mSiO2
,1%),TEPA(Tetraethylenepentamine)C8H23N5,1-2%) and activity
clay(25%) to treat used motor oil. These additives are expensive
and TEPA is very difficult to buy.
Our company`s vacuum distillation technology, only need to add one
chemical catalyst, which is cheap and easy to buy.
|Oil Heating Temp||180℃-270℃|
What can we get from DIRseries waste engine oil distillation
It is mainly used to change waste oil into clean base oil. The
final base oil will be SN150, SN250, SN300. The base oil can be
used as the raw materials of kinds of usable oil, such as new
engine oil, new motor oil, new lubricant oil and so on.
You can build one production line for waste oil into new engine
oil, or you can sell the base oil to other oil manufacturers
1.what ability we have?
mature technologies and skillful workmanship (we control every
single manufacturing process and make sure
it will be done perfectly in our factory with the lowest cost with
the best quality assurance). products quality guarantee and about
30 days free train(competitors cant spend much time in you
factory,stay long you will find many problems about their machine)
2.How to deal with the residue?
The final residue is semi solid and can be processed for
manufacturing asphalt, or briquette for burn, or blend
with oil to make off-speck heavy fuel oil or to make greases for
slow moving machineries.
3.Why we need to add the catalyst?
Catalyst will keep the recycled oil stabilization, avoiding the
recycled oil oxidate and color change back to black. So the
recycled oil from our machine will keep yellow at least half one
year or one year.
4.Why the machine need work under vacuum condition?
The machine work under negative pressure, the boiling rage of the
used oil is lower under high vacuum
condition, if without vacuum unit, the oil will crack when
temperature up to 420-450 degree( and the oil will
become to diesel when temperature is 450 degree)